You are here: Home Page > News Center > Product Information > Aggregate Industries Equipment in China

Aggregate Industries Equipment in China

Author:liming Post Date:2013-9-6

Aggregate Industries Equipment Ring Hammer Crusher:

Ring hammer aggregate industries equipment is suitable for crushing various brittle materials, such as coal, coal Chin-shek, coke, slag, shale, loose limestone, etc.. The compressive strength of the material does not exceed 10MPa, the surface water less than 8%. Winnowing hammer aggregate industries equipment used in building materials, bricks, coal, metallurgy, mining, electric power, light industry and other industrial sectors for crushing coal, shale, coal cinder, carbon, lime, cement Guessed, bentonite and in hard brittle materials.

Mobile Crusher:

Mobile aggregate industries equipment also called mobile crushing plant is self-driven, so that part is fixed on a whole rack, the following additional tire or crawler formation sand production line can move, liquidity material crushingoperations, widely used in railway, highway construction, water conservancy, metallurgy and other industries, especially for flowable materials such as highway, railway, construction waste disposal operations, is the rise of new stable and efficient production of new environmentally friendly crushingmachine.

Gyratory Crusher:

Gyratory aggregate industries equipment is the use of of crushing cone in cone cavity of the housing cycle exercise, squeeze the material, splitting and bending, of coarse crushing various hardness ore or rock crushing machinery. The upper end of the spindle equipped with a cone aggregate industries equipment is supported on the beams the central liner, and its lower end is placed in the eccentric hole of the sleeve. Rotating bushing, crushing cone around the machine centerline as eccentric cycle exercise its crushing action is continuous, so the efficiency is higher than jaw aggregate industries equipment. The early 1970s, large gyratory aggregate industries equipment hour has been able to handle materials 5000 tons Max feed up to 2000 mm in diameter.

Gyratory aggregate industries equipment two ways to achieve nesting population adjustment and overload insurance: First, the use of mechanical means, the upper end of the adjusting nut of the spindle, turning the adjusting nut crushing cone can decrease or increase the discharge opening result in changes larger or smaller, overloading, rely on cutting off the safety pin on the drive pulley to achieve insurance; the second hydraulic gyratory aggregate industries equipment hydraulic way, its spindle located in the hydraulic cylinder plunger, change under the plunger the volume of the hydraulic oil can be changed the crushing cone up and down position, so as to change the size of the discharge opening. Overload, the spindle downward pressure increases, forcing the plunger into the hydraulic oil accumulator in the hydraulic drive system, so the the crushing cone decline to increased nesting mouth, and discharged with non-material into the crushing chamber The crushed materials (iron, wood, etc.) in order to achieve insurance.

Aggregate Industries Equipment Impact Crusher:

Impact aggregate industries equipment is a rebound effect of the high-speed impact of the board hammer and counter plate material by repeated shocks and broken machinery. Hammer plate fixedly mounted on the high-speed rotation of the rotor, and counter plate arranged at different angles for several blocks along the crushing chamber.

Material into the role of the board hammer District, first by the first impact of the board hammer aggregate industries equipment initial and access to energy at the same time, high-speed rushed counterattack board. Materials and counter plate collision again broken, bounced back to board hammer District, by the impact of the board hammer again. So repeatedly, until it is broken into a desired particle size and discharged outside the machine. Compared with hammer aggregate industries equipment, impact aggregate industries equipment broken than the larger and more fully take advantage of the high-speed impact energy of entire rotor. Board hammer easy to wear, it is hard material crushing applications is limited, and is usually used to rough broken, breaking or crushing limestone, coal, calcium carbide, quartz, dolomite, iron pyrites, gypsum and stone raw materials and other medium hard brittle materials below.

Classification:

Aggregate industries equipment mainly various types of stone crushing particles of different sizes depending on the broken principles and products, is divided into many models. The aggregate industries equipment is widely used in mining, metallurgy, building materials, road, railway, water conservancy and stone industry and many other sectors. Commonly broken machinery jaw aggregate industries equipment, impact aggregate industries equipment, vertical impact aggregate industries equipment, hydraulic cone aggregate industries equipment, ring hammer aggregate industries equipment, hammer aggregate industries equipment, roll aggregate industries equipment, compound aggregate industries equipment, etc..