Products List
Disk Mill Machine
Author:liming Post Date:2013-3-15
Disk Mill Machine
Disk Mill Machine Introduction:
Disk mill machine is independently developed a new mechanical grinding equipment, its low energy consumption, set centrifugal crushing, impact crushing, squeezing crushed in an energy saving 40 to 50% higher than other types of mechanical grinder. The high fineness: with the grading system from Split, the product fineness ≥ 2500 mesh, feeding, feed size ≤ 50mm material only the a coarse broken equipment. Low abrasion, crushing part of the wearing parts the composite wear new material, long service life, pollution-free processing Mohs hardness ≤ 5 material.
Advantages and Trends:
With the continuous development of the milling machinery industry, disk mill machine as the the powder industry grinding equipment. High reliability, energy-saving, precision, automation is the inevitable trend of development.
Disk mill machine production and R & D experience, in recent years, Raymond is widely used in the fields of metallurgy, building materials, chemical, mining minerals such as grinding materials processing, suitable for processing Mohs hardness of seven, humidity below 6% a variety of non-explosive minerals such as gypsum, talc, calcite, limestone, marble, feldspar, barite, dolomite, granite, kaolin, bentonite, medical stone, bauxite, iron oxide red, iron mine, such as, product fineness of 613 microns to 440 microns (0.613 mm -0.44 mm), through the analysis of machine and fan together, to meet the different requirements of users.
Experts believe that, disk mill machine powder industry mainly to the high reliability, the development of energy-saving, accurate, automatic condition monitoring and automatic control direction. Using SCR power supply, AC variable speed, centralized grease lubrication, shock absorption, and other measures, and condition monitoring and microcomputer automatic control device. Which high reliability through mechanical principle of rationalization study reinforced grinding ring under the wear resistance of the gland, etc., to improve the machine in a continuous state bearing lubrication before. Automatic condition monitoring and automation control need increased Raymond inside the the high intelligent electronic control system, out of the automatic control materials, grinding, and quantitative. The operator need only in the operating room, the button control. Improve the precision grinding of materials needed to enhance the accuracy of the analysis machine.
Disk Mill Machine Performance Characteristics:
Disk mill machine, we produce the product features, needle-like material can be crushed, crushing process temperature rise, suitable for heat-sensitive materials crushed on sintering reunion ultrafine materials scattered jobs, granular recovery rate of 100%particles having a shaping function, improve the bulk density, and can crush the material of the fibrous tissue, and also having a drying function. Its production of negative pressure, no dust pollution, environmental quality, and high degree of automation, stability, easy to operate, can reduce the cost of the investment, the companies have chosen the best milling equipment.
Disk Mill Machine Installation:
Install disk mill machine run the site have not been installed, you should take good care of the exposed surfaces are coated with anti-rust grease, and avoid the sun and rain, to prevent the body rust water, To establish maintenance system. Plant and foundation should have enough height and installation location of the installed base size of the chart according to Raymond, Raymond should be based on high-standard cement and shall be buried reinforced before being placed foundation, and I buried conduit or cable trench. After pouring the cement foundation, there must be a 15-day maintenance period. Should be 2 to 3 tons with a lifting tool for Raymond installation maintenance. Raymond from the factory to use over six months, to host the central axis of the system, the transmission roller device, and analysis of oil pools should be cleaned inspection, cleaning checked respond to the various components add sufficient lubricant.