Products List
Maws Glass Crushing Equipment
Author:liming Post Date:2013-5-10
Maws Glass Crushing Equipment
Maws Glass Crushing Equipment Introduction:
Maws glass crushing equipment can be different sizes of raw materials, broken into small pieces of uniform particles, maws glass crushing equipment either supporting and beneficiation equipment, sand and gravel equipment can also be used alone. maws glass crushing equipment can produce the cornerstone of the road, railway ballast stone and construction sand and gravel aggregate. The maws glass crushing equipment divided into coarse crushing maws glass crushing equipment and crushing maws glass crushing equipment, which is commonly referred to as PE series maws glass crushing equipment and PEX series maws glass crushing equipment. maws glass crushing equipment series, with the crushing, product uniform particle size, simple structure, reliable work, easy maintenance, low operation cost characteristics.
Maws Glass Crushing Equipment Working Principle:
Maws glass crushing equipment way for music moving extrusion type, motor-driven belt and pulley, through the eccentric shaft to make the movable jaw up and down movement, when the movable jaw rises larger angle between toggle plate and moving jaw, thus promoting the movable jaw plateclose to the fixed jaw plate, at the same time the material is squeezed, rubbing, grinding, such as multiple broken; when the movable jaw down, the angle between toggle plate and moving jaw smaller, movable jaw plate trolley spring left jawboard, crushed material is discharged from the crushing chamber mouth cyclical With the motor continuously rotating crusher mobile jaw crushing and nesting to achieve mass production. maws glass crushing equipment, crushing, product size uniform, simple structure, reliable operation, easy maintenance, low operating cost characteristics. Our product specification is complete, the device of choice for primary crushing.
Maws Glass Crushing Equipment Characteristics:
High ratio of crushing; Even final size; Simple structure; Reliable working condition; Easy maintenance; Low operating cost.
Maws Glass Crushing Equipment Common Sense:
The maws glass crushing equipment is often due to improper use caused the crash phenomenon crusher to be crushed when the material, we must pay attention to pay attention to the uniformity of the material under, there is the hardness of the material was suitable, if perfect, canplus one step.
The main factors that generally affect the maws glass crushing equipment nip angle and the number of revolutions. Nip angle is moving Hubei and the angle between the fixed jaw. According to the calculation of the maximum nip angle up to 32 degrees. The actual use are less than 25 degrees, typically about 18-20 degrees. Nip angle is too large, make up the ore crushing cavity extrusion, resulting in injuries or damage to other equipment, at the same time as the nip angle increases (broken than increase) decrease in productivity. Adjust the size of the port of discharge, and also change the size of the nip angle. In real life, according to the row of ore particle size to adjust the size of the discharge mouth. Therefore, to ensure that the product size requirements, try to Pai mine mouth amplification is reasonable. Pai mine mouth size can be adjusted by adjusting the block to adjust the size of the port of discharge, pay attention to the broken relationship between the ratio and productivity.
Within a certain range, an increase of the number of revolutions of the eccentric shaft, the production capacity of the crusher can be improved, but also increases the power consumption of the crusher unit weight of ore. The speed is too large, the time to discharge causes the crushing chamber has been crushed ore to produce clogging, but the production capacity to reduce, increase in power consumption, therefore, maws glass crushing equipment should be an optimum number of revolutions.
Maws glass crushing equipment eccentric shafts, connecting rods, movable jaw plate, shaft and liner wear parts, lubrication and replacement needs constant attention.
Liming Maws Glass Crushing Equipment:
Liming Heavy Industry is committed to producing the best mechanical crushing equipment, capable of producing various types of crusher and mill, and reached the leading level in the world. We are a trustworthy maws glass crushing equipment manufacturer capable of producing all types of maws glass crushing equipment, good quality and reasonable prices. Liming Heavy Industry production of maws glass crushing equipment is a set of similar products at home and abroad, the successful experience, devote themselves to come up with an energy-efficient crushing equipment. Medium-sized maws glass crushing equipment is one of the leading products of the company, especially in the design and production of large crusher mill at the absolute leading level at home and abroad.
If you need any help of maws glass crushing equipment, please contact us directly. We aim to provide you with the best maws glass crushing equipment and the most economical reasonable solution, our experts will provide technical assistance at any time for you. Looking forwards to establish a long-term business relationship with you.