Products List
Used Ballast Crusher in Italy For Sale
Author:liming Post Date:2013-3-29
Used Ballast Crusher in Italy for Sale
Used Ballast Crusher Profile:
Used ballast crusher in the huge stones crushed into small stones, the first crusher is usually referred to as a "master" crusher. The longest history, but also the most solid crusher used ballast crusher. used ballast crusher feeding the material from the top of the entrance into the crushing chamber containing jaw teeth. Jaw teeth with great force the material to the top of the wall will be broken into smaller stones. Support the jaw movement is an eccentric shaft, this axis throughout the body architecture. The eccentric motion is usually generated by a flywheel fixed on the shaft ends. Flywheel and often eccentric support bearing spherical roller bearings, bearing extremely harsh working environment. The bearings must withstand tremendous impact load, abrasive sewage and high temperature. Although this work is extremely harsh environment, used ballast crusher still need to work very reliably, which is to ensure the efficiency of the production of a key ring.
The used ballast crusher is currently the most widely used crusher with crushing ratio, product size is uniform, low operating cost, simple structure, easy maintenance. In mining, building materials and infrastructure sector is mainly used as the primary crusher and crusher. In accordance with the size of the feed mouth width, divided into large, medium and small three. Mining, metallurgy, building materials, road, railway, water conservancy and stone widely used in a variety of industries.
Used Ballast Crusher Advantage:
1, The crushing chamber is deep and smooth, enhancing the feeding capacity and production.
2, High crushing ratio, homogeneous final product.
3, Adjusting the discharge opening through gasket , the adjusting range is wide to meet the customer's different requirement..
4, Safety and reliable Lubricate system, easy maintenance and replacement.
5, Single machine can save energy to 15%-30% , a set of machine can save energy doubly.
6, Low noise and little dust.
Working Principle:
The belt drives eccentric shaft rotating by motor. The vetical links will move up and down accordingly. The two pieces toggle plates are extended gradually when the vertical links goes up. The toggle plates will put movable jaw plate towards fixed jaw plate, the mineral stone in the crushing chamber( between movable jaw plate and fixed jaw plate) will be squashed, cleaved, and flexed and then be crushed. As the vertical links and movable jaw plate are backed by the power of spring and links, the discharge opening will increase, and the crushed mineral stone will be discharged. So we can say used ballast crusher discharges stone indrectly. The eccentric shaft goes a circle, there is half circle time will be used for crushing, the remaining time will be used for discharging.
Used Ballast Crusher Application:
Used ballast crusher for cement, coal preparation, power generation and building materials, to adapt to the crushing of medium hardness and brittle materials, such as limestone, coal. The maximum compressive strength of not more than 1500kg/cm2.
Production of Less Than Factory Standard:
Used ballast crusher production to reach the factory standard exclusion method:
1, replace or increase the crusher;
2, replacement motor wiring;
3, nesting population adjustment to the instructions provided for nominal discharge opening and increased crusher used for crushing.
Liming Used Ballast Crusher in Italy for Sale:
Liming Heavy Industry is committed to producing the best mechanical crushing equipment, capable of producing various types of crusher and mill, and reached the leading level in the world. We are a trustworthy used ballast crusher manufacturer capable of producing all types of used ballast crusher, good quality and reasonable prices. Liming Heavy Industry production of used ballast crusher is a set of similar products at home and abroad, the successful experience, devote themselves to come up with an energy-efficient crushing equipment. Medium-sized used ballast crusher is one of the leading products of the company, especially in the design and production of large crusher mill at the absolute leading level at home and abroad.
If you need any help of used ballast crusher in Italy for sale, please contact us directly. We aim to provide you with the best used ballast crusher and the most economical reasonable solution, our experts will provide technical assistance at any time for you. Looking forwards to establish a long-term business relationship with you.