Products List
Fly Ash Grinding Techniques
Author:liming Post Date:2012-11-16
Fly Ash Grinding Techniques Introduction:
Fly Ash Grinding Techniques
Fly ash grinding techniques suitable for barite, calcite, feldspar, talc, marble, limestone, ceramic, glass, Mohs hardness of not more than 7 and humidity below 6% of non-flammable mining, stone 280 kinds of building materials, metallurgy and other industries powder processing, product size is in the range of 100-425 mesh arbitrary regulation.
Fly Ash Grinding Techniques Installation Considerations:
Running scene yet installed when fly ash grinding techniques should safekeeping, the exposed surfaces are coated with anti-rust grease, and avoid the sun and rain, to prevent the body rust influent to the establishment and maintenance system. Plant and foundation should have enough height and installation location of the installed base size of the chart according to Raymond, Raymond should be based on high-standard cement and shall be buried reinforced before being placed foundation, and I buried conduit or cable trench. After pouring the cement foundation, there must be a 15-day maintenance period. Should be 2 to 3 tons with a lifting tool for Raymond installation maintenance. Raymond from the factory to use over six months, to host the central axis of the system, the transmission roller device, and analysis of oil pools should be cleaned inspection, cleaning checked respond to the various components add sufficient lubricant.
Maintenance of Fly Ash Grinding Techniques:
1, Mill in the use of the process, there should be a fixed staff responsible for the care, the operator must have a certain level of technology. Mill before installing the operating personnel must carry out the necessary technical training to understand the principle of the mill performance, familiar with operating procedures.
2, For the proper mill, should develop Equipment "equipment maintenance, safe operation of the system" can ensure mill long-term safe operation, and at the same time to have the necessary repair tools and grease and corresponding accessories.
3, Mill use for some time, should be carried out maintenance, overhaul to replace wearing parts of the roller mill ring blade processing, grinding roller device in use before connecting bolt nut should be carefully examined to see if there is a loosening , to add a little grease.
4, The roller device use time more than 500 hours or so to replace the roller of each roller comprising rolling bearings must be cleaned, damaged parts should be replaced, refueling tool can be used to manually add the oil pump and grease gun.
Fly Ash Grinding Techniques Works:
Large block of raw materials to the required feed size jaw crusher crushing machine materials transported to storage silos, and then by the electromagnetic vibrating feeder evenly sent to the host of grinding cavity, shovel bucket elevator knife and grinding roller with the transfer process, the material is scooped up throwing feeding grinding roller between the roller ring, the formation of the litter layer, the material between the roller and grinding ring grinding, and thus achieve pulverizing purpose. The powder after grinding by the fan airflow into the analysis machine for powder fineness requirements fine powder with the air flow through the pipe into the large cyclone collector, collected separately, then unloader discharge is the finished powder return air duct airflow from the upper end of the large cyclone collector inhalation blower. The powder will be undesirable leaves thrown to the outer wall and the air flow from the coarse sub due to the role of self-gravity into the grinding chamber for regrinding. The entire airflow system of the machine is closed loop, and is in the positive and negative pressure state where the circulating flow.
Liming Fly Ash Grinding Techniques:
Liming Heavy Industry is committed to producing the best mechanical crushing equipment, capable of producing various types of crusher and mill, and reached the leading level in the world. We are a trustworthy fly ash grinding machine manufacturer capable of producing all types of fly ash grinding machine, good quality and reasonable prices. Liming Heavy Industry production of fly ash grinding machine is a set of similar products at home and abroad, the successful experience, devote themselves to come up with an energy-efficient crushing equipment. Medium-sized fly ash grinding machine is one of the leading products of the company, especially in the design and production of large crusher mill at the absolute leading level at home and abroad.
If you need any help of fly ash grinding techniques, please contact us directly. We aim to provide you with the best fly ash grinding machine and the most economical reasonable solution, our experts will provide technical assistance at any time for you. Looking forwards to establish a long-term business relationship with you.