Products List
Milling Equipment Machine
Author:liming Post Date:2013-7-19
Milling Equipment Machine
Milling Equipment Machine Work Process:
Will need to crush the material uniformly continuous fed into the grinding chamber, scoop up material sent between the roller and grinding ring rotates, centrifugal force, grinding roller swings out, pressed on the grinding ring blade, because of the grinding rollersrolling the reach crushed purpose.
Material after grinding, grinding into the analysis with the blower circulating air separation, fine through coarse material Rockwell will re-grinding, qualified powder into the finished product cyclone powder collector with the flow discharged stone tube, that is for the finished product.
Materials in the grinding room was grinding some moisture, grinding heat, moisture evaporation, and the whole pipe interface is not tight, the outside air is inhaled, the circulation increased pressure to ensure that the mill work in the vacuum state , the increase in gas flow through the I wind tube into the dust collector, into the atmosphere after being purified.
Milling Equipment Machine Accessories Material:
The milling equipment machine fittings grinding roller and grinding ring. Which, roller and grinding ring two materials:
1, 65Mn: after using this material, the grinding roller and grinding ring, its durability is significantly improved. This product is characterized by high hardness, wear resistance, and magnetic. The product is mainly used for removal of iron powder processing areas. The product after normalizing heat treatment, the mechanical properties greatly improved, making the product not only good wear resistance and toughness greatly improve.
2, Mn13G2: Compared with 65Mn, roller and grinding ring using of the Mn13G2 material casting, durability has changed. This product castings after pouring water toughening treatment. Water toughening treatment after casting With high tensile strength, toughness, stone and non-magnetic. Roller and grinding ring more durable. Use of the process by the surface hardening, the deformation of the severe shock and strong pressure, and martensite is formed, thereby forming a high abrasion resistant surface layer, while the inner maintaining excellent toughness even wear to the thin, can also be withstand greater shock load.
Milling Equipment Machine Application:
Milling equipment machine is widely applicable to the barite, calcite, feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, glassinsulation materials Mohs hardness of not more than 7 and humidity below 6% of non-flammable mineral, chemical, construction and other industries more than 300 kinds of materials for high fine powder processing.
Milling Equipment Machine Performance Characteristics:
Milling equipment machine, we produce the product features, needle-like material can be crushed, crushing process temperature rise, suitable for heat-sensitive materials crushed on sintering reunion ultrafine materials scattered jobs, granular recovery rate of 100%particles having a shaping function, improve the bulk density, and can crush the material of the fibrous tissue, and also having a drying function. Its production of negative pressure, no dust pollution, environmental quality, and high degree of automation, stability, easy to operate, can reduce the cost of the investment, the companies have chosen the best milling equipment.
Milling Equipment Machine Installation:
Install milling equipment machine run the site have not been installed, you should take good care of the exposed surfaces are coated with anti-rust grease, and avoid the sun and rain, to prevent the body rust water, To establish maintenance system. Plant and foundation should have enough height and installation location of the installed base size of the chart according to Raymond, Raymond should be based on high-standard cement and shall be buried reinforced before being placed foundation, and I buried conduit or cable trench. After pouring the cement foundation, there must be a 15-day maintenance period. Should be 2 to 3 tons with a lifting tool for Raymond installation maintenance. Raymond from the factory to use over six months, to host the central axis of the system, the transmission roller device, and analysis of oil pools should be cleaned inspection, cleaning checked respond to the various components add sufficient lubricant.
Liming Milling Equipment Machine:
Liming Heavy Industry is committed to producing the best mechanical crushing equipment, capable of producing various types of crusher and mill, and reached the leading level in the world. We are a trustworthy milling equipment machine manufacturer capable of producing all types of milling equipment machine, good quality and reasonable prices. Liming Heavy Industry production of milling equipment machine is a set of similar products at home and abroad, the successful experience, devote themselves to come up with an energy-efficient crushing equipment. Medium-sized milling equipment machine is one of the leading products of the company, especially in the design and production of large crusher mill at the absolute leading level at home and abroad.
If you need any help of milling equipment machine, please contact us directly. We aim to provide you with the best milling equipment machine and the most economical reasonable solution, our experts will provide technical assistance at any time for you. Looking forwards to establish a long-term business relationship with you.